Category:
Banded wedge V-belt
The narrow joint group layers to make the several single narrow V-belts as a whole, so that each belt can bear a uniform force and a larger load. In transmission, the problem of different lengths of multiple single V-belts during matching is solved. The transmission efficiency is high and the service life is longer.
Product details
Type |
Top Width |
Pitch Width |
Height |
Angle |
Length Conversion |
Length Range(inch) |
Length Range(mm) |
Factor Mark |
3V(9J) |
9.7 |
10.3 |
9.7 |
40° |
La=Li+63 |
47"—197" |
1200-5000 |
La |
5V(15J) |
15.7 |
17.5 |
15.7 |
40° |
La=Li+98 |
59" -394" |
1500-10000 |
La |
8V(25J) |
25.4 |
28.6 |
25.4 |
40° |
La=Li+157 |
79" -650" |
2000-16500 |
La |
SPZ |
10.5 |
—— |
10.0 |
40° |
La=Li+63 |
47 "-197" |
1200-5000 |
La |
SPA |
13.6 |
—— |
12.3 |
40° |
La=Li+78 |
47 "-197" |
1200-5000 |
La |
SPB |
17.0 |
19.05 |
16.5 |
40° |
La=Li+105 |
59" -394" |
1500-10000 |
La |
SPC |
22.0 |
25.5 |
21.0 |
40° |
La=Li+132 |
118"-492" |
3000-12500 |
La |
• FEATURES
The narrow joint group
layers to make the several single narrow V-belts as a whole, so that each belt can bear a uniform force and a larger load. In transmission, the problem of different lengths of multiple single V-belts during matching is solved. The transmission efficiency is high and the service life is longer.
• MARKING
Narrow joint group V-belts is the model, the number of joint groups, length and length marking, and the marking of narrow joint group V-belts represents the outside length of factory V-belts. The customers should note the special requirements (if any) on the order list, and the length conversion table above is available for conversion between various models.
• EXAMPLE OF MARK
key word:
Banded wedge V-belt