I. Nylon conveyor belt

It is made of multiple layers of nylon canvas bonded together in a certain way, covered with strong, elastic and wear-resistant rubber. It is used for conveying small and medium-sized lumpy/granular/powder objects, suitable for high-speed, medium and long distance impact-resistant transportation.

Variety: According to the performance of covering rubber, it can be divided into general-purpose type and wear-resistant type/non-combustible type. Nylon core conveyor belt has the characteristics of thin belt body, high strength, impact resistance, good performance, high interlayer bonding strength, excellent flexibility and long service life, etc. It is suitable for medium and long distance, high load capacity and high speed transportation of materials.

Model: NN80, NN125, NN100, NN150, NN200, NN300, NN400; Common type conforms to the standard: GB/T7984-2001; General flame-retardant type conforms to the standard: GB/T10822-89 Specifications (1) Bandwidth: 100mm- 3000mm 3000mm (2) Cloth layer: 2-8 layers (3) Covering rubber: working surface: 1.5-8mm Non-working surface: 0mm-4.5mm

Nylon conveyor belt has the advantages of high strength, good elasticity, impact resistance, light weight and good grooving compared with ordinary cotton core conveyor belt, which can effectively reduce conveying cost and realize high speed, large span and long distance conveying.

2、General conveyor belt

1、This product is made of full 1 cotton canvas (CC) or woven cotton interwoven canvas (VC) refined by calendering, molding and vulcanization processes.

2、It is suitable for conveying non-corrosive non-spiky lump, granular, powder materials such as coal, coke, gravel, cement and other bulk (materials) or pieces of goods at room temperature.

3、The product can be made into different structures such as wrapped edge type, open edge type, middle ladder type, side ladder type, etc. to meet the requirements of different use conditions. Note: 1、Please write to us or contact us for special specification requirements. 2、The thickness of the upper and lower cover layer can be selected according to the range in the table. 3, tape width, cover layer thickness and tape length deviation according to the national standard GB/T4490-94 requirements.

4、The longitudinal full-thickness tensile strength specification series is executed according to GB/T7894-87.

Three acid and alkali resistant conveyor belt

It is suitable for working environment with acid and alkali contact, such as phosphate fertilizer manufacturing, seawater salt drying, covering rubber with rubber-plastic blending and filled with inert material with excellent acid and alkali resistance, which has better performance than neoprene acid and alkali resistant conveyor belt. The skeleton material is made of EP canvas, which is more reliable than cotton canvas core belt in terms of acid and alkali resistance. It is generally made into a ring shape.

Polyester (EP) conveyor belt Polyester conveyor belt is made of multi-layer polyester (or polyester in the longitudinal direction, polyester amine in the weft direction) canvas bonded together in a certain way, covered with high strength and good elasticity of wear-resistant rubber.

It is used for conveying small and medium-sized lumpy/granular/powder materials. It is suitable for medium and long distance, high load and high speed conveying materials.

EP conveyor belt has many advantages of nylon conveyor belt, but it also has the unique advantages of small length and no reduction of strength in wet state. This is especially important for long distance conveyance and wet working conditions.

EP canvas is available in the following strength specifications: 100N/mm 125N/mm 150N/mm 200N/mm 250N/mm 300N/mm 400N/mm, etc.